Search
Search
This course seeks to produce postgraduates with the versatility and depth of understanding to deal with new and unusual challenges in mechanical engineering, alongside the necessary imagination and creativity to innovate.
Year of entry
2024-25
Location
Coventry University (Coventry)
Study mode
Full-time
Part-time
Sandwich
Duration
1 year full-time
2 years part-time
2 years sandwich
Course code
EECT048
Start date
September 2024
January 2025
The MSc in Advanced Mechanical Engineering is informed by Coventry University’s commercial and academic research in areas such as durability and reliability, light-weighting, renewable energy technologies of wind and hydropower, advanced simulation and future concepts.
Coventry University has a long and prestigious automotive, transport and engineering heritage. Our graduates are employed by automotive vehicle and system manufacturers and design professionals all over the world.
This course is accredited1 and recognised by the following bodies:
As part of this course, you will undertake a professional development module which is currently accredited by the Chartered Management Institute for the 2024-25 intake. Upon successful completion of this module, you will gain the CMI Level 7 Certificate in Strategic Management and Leadership Practice at no additional cost. Coventry University’s accreditation with CMI is currently ongoing for the relevant modules and is regularly reviewed and monitored by the CMI through their quality systems.
This degree is accredited by the Institution of Mechanical Engineers (IMechE) up to and including the 2025 intakes under licence from the UK regulator, the Engineering Council. Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.
Students completing an IMechE accredited degree are deemed to have met part or all of the academic requirements for registration as a Chartered or Incorporated Engineer and are in a strong position to move on to achieve professional engineering status after a period of initial professional development in industry.
The accredited MSc will meet, in part, the exemplifying academic benchmark requirements for registration as a Chartered Engineer. Accredited MSc graduates who also have a BEng (Hons) accredited for CEng will be able to show that they have satisfied the educational base for CEng registration.
It should be noted that graduates from an accredited MSc programme that do not also have an appropriately accredited Honours degree, will not be regarded as having the exemplifying qualifications for professional registration as a Chartered Engineer with the Engineering Council; and will need to have their qualifications individually assessed through the Individual Case Procedure if they wish to progress to CEng.
We are a Membership Partner with the Institution of Mechanical Engineers (IMechE).
Working in collaboration with the IMechE we aim to ensure our engineers and technical teams meet industry-recognised standards of engineering excellence.
We are committed to the professional development of everyone within our organisation, and recognise that professional registration and recognition are crucial in helping our employees and business grow and excel.
You’ll be encouraged to study the principles of engineering, physics and materials science, alongside the design and analysis, modelling and simulation, manufacturing and maintenance of mechanical systems.
The course culminates with your individual project, which provides an opportunity to apply the theories and techniques you have learned during your studies. It may focus on one area of study or involve a combination of subjects.
Past student projects have included the following: development of a computer model of Fiat Punto for pedestrian impact simulation; design of novel bone-implant interface medical devices; analysis of fluid-structure interaction with smoothed particle hydrodynamics and a 3D CFD model analysis of urban air flow around high-rise buildings at the Business Centre of La Défense (Paris).
Your project can be industry-based if you are already working or wish to follow the work placement option2. For example, one project commissioned by the US Air Force studied the effect of fatigue and corrosion on the structural integrity of aging aircraft components.
The ‘With work placement’ opportunity2 enables you to apply in semester 1 for an optional work placement of up to 12 months, extending the duration of your master’s to 24 months. The placement provides an opportunity for you to develop expertise and experience in your chosen field with the aim of enhancing your employability upon graduation. The work placement would take place in semesters 3, 4 and 5.
Please note that the optional placement modules will incur an additional tuition fee of £4,000. Placement opportunities may also be subject to additional costs, visa requirements being met, subject to availability and/or competitive application. Work placements are not guaranteed but you will benefit from the support of the Talent Team in trying to find and secure an opportunity. Find out more about the work placement option.
We regularly review our course content, to make it relevant and current for the benefit of our students. For these reasons, course modules may be updated.
A wide range of teaching methods will be used including:
Many of the modules adopt an Activity-Led Learning (ALL) approach, for example, we might investigate flow patterns in a network of channels by computer simulation using commercial packages to improve the design of a thermofluid system. Alternatively, in a practical learning session, you may develop measurement skills in our modern metrology laboratory.
This course can be offered on a part-time basis. Whilst we would like to give you all the information about our part-time offering here, it is tailored for each course each year depending on the number of part-time applicants. Therefore, the part-time teaching arrangements vary. Request further information about part-time study.
The number of contact hours may vary from semester to semester, however, on average, it is likely to be around 12 contact hours per week in the taught semesters. Additionally, you will be expected to undertake significant self-directed study approximately 35 hours each week, depending on the demands of individual modules.
Your project-based semester will be supervisor supported, self-directed study in the region of 45 hours per week as well as supervisor meetings around 1 hour per week and optional workshops supporting your project, which can add around 10 additional hours across your project semester.
The contact hours may be made up of a combination of face-to-face teaching, individual and group tutorials, and online classes and tutorials.
As an innovative and enterprising institution, the university may seek to utilise emerging technologies within the student experience. For all courses (whether on-campus, blended, or distance learning), the university may deliver certain contact hours and assessments via online technologies and methods.
Since COVID-19, we have delivered our courses in a variety of forms, in line with public authority guidance, decisions, or orders and we will continue to adapt our delivery as appropriate. Whether on campus or online, our key priority is staff and student safety.
This course will be assessed using a variety of methods which could vary depending upon the module. Assessment methods include reports, tests, exam, practical coursework and presentations.
The Coventry University Group assessment strategy ensures that our courses are fairly assessed and allows us to monitor student progression towards the achieving the intended learning outcomes.
Typical offer for 2024/25 entry.
2024/25 tuition fees.
Student | Full-time | Part-time |
---|---|---|
UK, Ireland*, Channel Islands or Isle of Man | £11,200 | £4,000 (Work placement option additional fee) | Request fee information |
EU | £11,200 | £4,000 (Work placement option additional fee) per year with EU Support Bursary** £20,050 | £4,000 (Work placement option additional fee) per year without EU Support Bursary** |
Not available |
International | £20,050 | £4,000 (Work placement option additional fee) | Not available |
For advice and guidance on tuition fees3 and student loans visit our Postgraduate Finance page and see the university's Tuition Fee and Refund Terms and Conditions.
We offer a range of International scholarships to students all over the world. For more information, visit our International Scholarships page.
Tuition fees cover the cost of your teaching, assessments, facilities and support services. There may be additional costs not covered by this fee such as accommodation and living costs, recommended reading books, stationery, printing and re-assessments should you need them.
The following are additional costs not included in the tuition fees:
The rights of Irish residents to study in the UK are preserved under the Common Travel Area arrangement. If you are an Irish student and meet the residency criteria, you can study in England, pay the same level of tuition fees as English students and utilise the Tuition Fee Loan.
Following the UK's exit from the European Union, we are offering financial support to all eligible EU students who wish to study an undergraduate or a postgraduate degree with us full-time. This bursary will be used to offset the cost of your tuition fees to bring them in line with that of UK students. Students studying a degree with a foundation year with us are not eligible for the bursary.
Our aim is to offer you sector-leading facilities4.
AME brings together academia, industry, and research and development in a ‘live’ manufacturing environment. Our collaboration with Unipart gives you the opportunity to work with some of the most talented engineering professionals in the UK.
Situated on the ground floor of our Engineering and Computing Building, the centre houses flight and driving simulators, a chassis design assembly and test facility, wind tunnels and a fleet of CNC manufacturing machines.
Participate in technical work in a hands-on way. The workshop includes lathes, milling machines, fabrication equipment for sheet metal work, CNC machines, work benches, welding lines and a fitting assembly area.
On successful completion, you will have knowledge of:
On successful completion, you will be able to:
A global skills shortage continues to ensure engineers remain among the most in-demand professions. Skilled engineers are increasingly sought after and there just simply are not enough engineers to go around.
A wide range of potential careers could be open to you after successful completion, including the opportunity to work as a mechanical engineer in the automotive and aerospace industries. Mechanical engineers are employed in all sectors of industrial operation; their analytical and management skills are keenly sought in a wider commercial context.
Coventry University has a long and prestigious automotive, transport and engineering heritage and we will actively encourage and support you to make the most of this demand and prepare you for the world of work.
Our Engineering master’s courses provide a route into many careers with the global automotive engineering industry. Many of our graduates have gone on to work for ExxonMobil, Airbus, JLR, Bentley, Lotus, Unipart, Aston Martin Lagonda and many OEMs. Others have continued to PHD studies and moved into research.
Based on current information from the UK Government, international students whose study extends beyond summer 2021 may be eligible for a visa under the UK Government’s Graduate Immigration Route, which will enable students to stay and work, or look for work, in the UK at any skill level for up to two (2) years. Check the most up to date guidance available to check your eligibility and any updates from the UK Government before making an application or enrolment decision.
To apply to study for a postgraduate course at Coventry University, you can apply online.
For further support or more information about your course get in touch with us today.
Chat with our admissions team
Complete our contact form.
Full-time international students should apply directly to the university. Read our application pages to find out your next steps to apply.
How to applyFor further support for international applicants applying for postgraduate degree view our International hub.
You can also download our International guide which contains lots of useful information about our courses, accommodation and tips for travel.
Get in touch with us today for further advice and guidance.
Chat with our admissions team.
Complete our contact form.